5 ways to Remove Moisture from your Compressed Air
Dry air is required to provide compressed air with high quality and usability. Compressed air performs best when it is free of liquid moisture and has a relative humidity lower than 50%. Corrosion within your equipment is prevented by this, thereby extending its lifespan.
It is essential to remember that moisture in compressed air can damage your tools and equipment. Here's how it's done:
- Moisture clogs air control lines, causing instrumentation to malfunction.
- It wreaks havoc with air tools by interfering with lubrication.
- Water can have an immediate impact on processes by entering the condensed air stream.
Moisture must be removed from equipment in order to prevent the problems mentioned above. By removing moisture from the air, an air dryer keeps your compressor and other items from corroding. The best air drier depends on numerous factors, such as the type of business and industry you are in. Regardless of what you choose, make sure it is a high-quality compressed air dryer.
Compressed air can be eliminated from moisture using five primary methods. Here's some information about each.
Cooling and Separation - Cooling hot compressed air causes a great deal of water to condense. By this stage of the process, it is possible to separate the moisture from the air, which will increase the efficiency of your operation and equipment. An aftercooler or heat exchanger can help with this step.
Over Compression - When air is compressed to a higher pressure than is expected. After expanding to operating pressure, the gas is able to be used as intended. With lower airflow rates, over-compression works best.
Membrane Drying - This technique involves selectively permeating gas components in the air so that the water vapor can be separated. The cylinder filters the wet compressed air, which gathers in the fibers. The dry air can pass through these fibers and continue to work usually.
Absorption Drying - A chemical absorption substance is utilized to gather water vapor in this method. Sodium chloride or sulfuric acid are common absorption materials that might be solid or liquid. This strategy is not as often used as the others.
Moisture in compressed air pipes can cause serious problems. If your company utilizes air-drying, make sure you choose the right solution. To learn more about how an air drier can help you remove moisture from compressed air.
